UPS

• Features
• True double-conversion online UPS
• Wide input voltage range (110-300 VAC)
• Input power factor correction 0.99
• Output power factor 0.8
• Converter mode available
• ECO mode operation for energy saving (only available for 1-3KVA)
• Generator compatible
• Smart SNMP works well with either USB or RS-232 together (SNMP NETWORK CARD need to be purchased separately)
• Back Time (Minutes)
• 25% Load 400W: 21 minutes
• 50% Load 800W: 7 minutes
• 75% Load 1200W: 4 minutes
• 100% Load 1600W: 2 minutes
• Note:
• Data given are the average values, not the minimum values.
• A UPS is not designed to provide continuous power, merely a window period that allows a computer or other user to finalise the work at hand and shut down. It’s ability to do this is dependent on the number of devices connected to the UPS.
• To establish what you can and cannot connect, calculate the total wattage you need to supply and ensure that the UPS you purchase meets that requirement.
• Specifications
• Colour: Black
• Phase: Single phase with ground
• Capacity: 2000 VA / 1600 W
• INPUT
• Voltage Range
• Low Line Transfer: 160 VAC/140 VAC/120 VAC/110 VAC 5% (Ambient Temp. (based on load percentage 100% – 80 % / 80 % – 70 % / 70 – 60 % / 60 % – 0)
• Low Line Comeback: 175 VAC /155 VAC/ 135 VAC /125 VAC 5 % (Ambient Temp. (based on load percentage 100% – 80 % / 80 % – 70 % / 70 – 60 % / 60 % – 0)
• High Line Transfer: 300 VAC 5 %
• High Line Comeback: 290 VAC 5 %
• Frequency Range: 40Hz ~ 70 Hz
• Power Factor: 0.99 @ nominal voltage
• OUTPUT
• Output Voltage: 200/208/220/230/240 VAC
• AC Voltage Regulation (Batt. Mode): 1%
• Frequency Range (Synchronized Range): 47 ~ 53 Hz or 57 ~ 63 Hz
• Frequency Range (Batt. Mode): 50 Hz 0.25 Hz or 60Hz 0.3 Hz
• Current Crest Ratio: 3:1
• Harmonic Distortion: 3 % THD (Linear Load), 6% THD (non-linear load)
• Transfer Time
• AC Mode to Batt. Mode: Zero
• Inverter to Bypass: 4 ms (Typical)
• Waveform (Batt. Mode): Pure Sinewave
• EFFICIENCY
• AC Mode: 89%
• Battery Mode: 87%
• BATTERY
• Battery Type: 12 V / 9 Ah
• Numbers: 4
• Typical Recharge Time: 4 hours recover to 90% capacity
• Charging Voltage: 54.7 VDC 1%
• INDICATORS
• LCD Panel: UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions
• ALARM
• Battery Mode: Sounding every 4 seconds
• Low Battery: Sounding every second
• Overload: Sounding twice every second
• Fault: Continuously sounding
• PHYSICAL
• Dimension, D x W x H (mm): 397 x 145 x 220
• Net Weight (kgs): 17
• ENVIRONMENT
• Humidity: 20-90 % RH @ 0- 40 C (non-condensing)
• Noise Level: Less than 50dB @ 1 Meter
• Optional SNMP (SNMP NETWORK CARD need to be purchased separately): Power management from SNMP manager and web browser
• NOTE 1: Derate to 80% of capacity in CVCF mode or when the output voltage is adjusted to 200/208VAC.
• NOTE 2: If the UPS is installed or used in a place where the altitude is above than 1000m, the output power must be derated one percent per 100m
• What’s in the box
• 1 x UPS Unit
• 1 x VGA Cable
• 2 x MALE TO FEMALE EXTENSION POWER CORD IEC C13-C14 (From UPS to PC)
• 1 x USB Cable (From UPS to PC)
• 1 x Driver Disk
• 1 x User Guide
• 1 x Dedicated Power Cord – Kettle Plug to RED 3 pin (A009
•  **12 MONTH COMPONENT WARRANTY,6 MONTH BATTERY WARRANTY ON ALL UPS**
• (The Warranty will be void if the UPS is damaged by a Power Surge or Lightning)

Description

• ME-1000-WPTU+
•  1000VA On-Line Tower UPS Unit & Rated Output: Up to 800W
•  Power Factor: ? 0.99 @ Nominal Voltage
•  Switching Time: 4ms to Bypass, 0ms to Battery
•  Battery Efficiency: 83% (Discharging)
• Recharge Time: 4 Hours to 90% Fan Noise Level: < 50dB @ 1 Meter
• Colour: Black
• Includes 2x 12V 9Ah Lead Acid Batteries
•  1x Standard Plug Point, 2x Power Lead Points
• Serial RS-232 & USB Configuration
• Supports Windows 2000 and Later, Linux x86-64, UNIX, macOS
•  **12 MONTH COMPONENT WARRANTY,6 MONTH BATTERY WARRANTY ON ALL UPS**
• (The Warranty will be void if the UPS is damaged by a Power Surge or Lightning)